Generation Robots (Inria Flowers) · European Union · Compact

Poppy Humanoid

Developer / demo platformDiscontinued, no longer sold

An 84 cm, 3.5 kg open-source, 3D-printed humanoid with an articulated 5-DOF spine, made for robotics research and the classroom. Its build-it-yourself kit is no longer sold, but the design stays open for anyone to build.

Last listed €9,971.52

Verified last month
Deliver to

What is in the crate

11 included|5 not included

Hands

No hands, none offered

Poppy Humanoid's arms have shoulders, elbows and wrists driven by Dynamixel servos but end in simple fixed, non-actuated end-effectors. There are no articulated fingers or grippers, so it cannot grasp or manipulate objects out of the box. Grippers would be a custom, community, or third-party add-on.

In the crate

25 Robotis Dynamixel actuators (MX-28AT, 4x MX-64AT, 2x AX-12A) 3D-printed structural parts in white polyamide (in the 'with 3D parts' kit) Raspberry Pi 4 Model B board 16 GB preflashed SD card with the Poppy system image 4-port USB hub Miniature Raspberry Pi camera (head vision) 3.4-inch DSI display (800x480) Horns, bearings, screws, nuts and fasteners (M2/M2.5) SMPS2Dynamixel adapters and SMPS chargers USB2AX adapters and 3-pin cables Power cable with 12V-to-6V converter, Loctite, adhesive tape, magnets

You still have to add

Assembly: it ships as an unassembled kit and takes roughly 7 hours to build (for an experienced builder) Autonomy or AI: no bipedal walking, no manipulation intelligence, no pretrained behaviors out of the box Shoes/feet covers (kit is compatible with children's size 23 shoes, not supplied) Any locomotion capability: it is not a self-balancing walking robot; it is typically operated on a stand or seated Commercial support or warranty beyond the distributor's standard terms

Day oneNothing, until you build it.

Reality check

This is a self-assembly research kit, not a product: it arrives as parts you spend a day building, it can't walk or grasp, and by the time you've bought all 25 Dynamixel servos you're near ten thousand euros for a benchtop platform whose value is that it's completely open and hackable.

Can you get one, and what will it cost?

A planning estimate with machine, freight, duty, and tax shown separately.

Effectively no

You cannot order the Poppy Humanoid today: it is discontinued.

The kit was sold openly as an education/research kit until Génération Robots delisted it in October 2026; its buyers were universities, schools, labs and hobbyist makers. The design is fully open source, so a determined builder can still source the bill of materials and 3D-print the parts, which is now the only way to get one.

Import requirements for United StatesConformity, battery shipping, paperwork, and source documents. Review before ordering.

Loading import requirements…

Open the import reference

Previous sellers

Catalog checked 2026-10

This model is discontinued. These links are historical references, not confirmation of stock.

The kit was sold openly as an education/research kit until Génération Robots delisted it in October 2026; its buyers were universities, schools, labs and hobbyist makers. The design is fully open source, so a determined builder can still source the bill of materials and 3D-print the parts, which is now the only way to get one.

Price notes: Génération Robots, the kit's historical distributor, last listed the complete Poppy Humanoid kit with 3D-printed parts at EUR 9,971.52 incl. VAT (EUR 8,310.02 excl. VAT, includes EUR 2.50 ecotax) and the version without 3D-printed parts at EUR 7,862.40 incl. VAT (EUR 6,552.28 excl.), both out of stock with a 4-6 week lead time. By 17 Oct 2026 both product pages were gone (they redirect to its humanoid category, which now lists only the Poppy Torso), so no seller offers the full humanoid kit. The open-source community bill-of-materials self-build is often cited around USD 8,000-9,000, with roughly 60% of that being the 25 Dynamixel actuators.

  • Self-build from the open BOM (opens in a new tab)

    International seller

    Fully open-source design. Community self-builds are commonly cited around $8,000-9,000, roughly 60% of which is the 25 Dynamixel actuators.

    Request a quote

    Historical listing

  • Génération Robots

    European Union

    Not currently orderable at this seller · Checked 2026-10-17

    Last listed: complete kit including the 3D-printed parts at EUR 9,971.52 incl. VAT (EUR 8,310.02 excl.), out of stock with a 4-6 week lead time. The kit pages were removed by 17 Oct 2026; the store now sells only the Poppy Torso.

    €9,971.52

    Historical listing

Prices remain in the seller’s listed currency. Tax, freight, options, and rental periods follow each seller’s terms. A seller’s region does not guarantee delivery to your address.

How the Poppy Humanoid rates

Editorial ratings based on listed specifications and sales availability. They do not measure task performance, autonomy, or reliability.

Class
Developer / demo platformA platform for demonstrations or robotics development. SDK access and supported tasks depend on the exact configuration.
CapabilityHardware specification indicators
2/5
  • Baseline: any humanoid+1
  • Degrees of freedom: 25 DOF+1
  • Dexterity: no hands, none offered0
  • Scale: 84 cm tall0
MaturitySales availability indicators
3/5
  • How it sells: discontinued, no longer sold+3

Key specifications

Height

84 cm

Width

n/a

Depth

n/a

Weight

3.5 kg

Degrees of freedom

25

Battery

n/a

Payload

n/a

Top speed

n/a

Understand before you buy

The maker's shares

All makers

Generation Robots (Inria Flowers): Private: its shares do not trade on any exchange.

Generation Robots is a privately held French robot distributor (the Poppy humanoid's historical distributor) and a business unit of NGX Robotics (Merignac). Poppy itself was designed by Inria's Flowers research team and is stewarded by the Poppy Station association, so there is nothing to buy on any exchange.

The Poppy Humanoid is no longer sold

The maker has ended this line, so there is no route to a new unit at any price. Register to hear what replaces it, and what a used one is really worth.

One email when it matters. No spam, unsubscribe anytime.

Size to scale

Drawn next to a 1.80 m (5 ft 11 in) person. Every robot on the site uses this same reference, so you can trust the comparison at a glance.

Poppy Humanoid: 84 cm / 2 ft 9 in, 3.5 kg

Human180 cm / 5 ft 11 inHumanoid84 cm / 2 ft 9 in
What it does on day onewith zero programming

Nothing, until you build it: it arrives as a bag of servos, electronics and 3D-printed parts that you assemble over several hours. Once assembled and flashed with the provided SD image, it powers up as a live, torque-controlled 25-DOF humanoid you can pose, teach movements to by hand (compliant/record-and-replay), stream motor and camera data from, and script immediately from a browser via Python/Jupyter. It does not walk, balance, or grasp on its own.

Best for: University robotics labs, developmental-AI researchers, and advanced STEM educators who want a fully open, hackable, Python-programmable humanoid platform to experiment on and are comfortable assembling and coding it themselves.

Documented uses

Robotics R&DTeaching / educationLearn and tinker

The Poppy project provides a modifiable open platform for educators and robotics researchers.

This is an assembly and programming platform. It does not provide autonomous household or warehouse work.

Source reviewed 2026-09-09

Assessment from published documentation, not an independent performance test. Applies to the configuration described above.

What it takes to developskills, gear, and SDK access

Assembly skills (about 7 hours of careful building), then Python. Programming is done over WiFi/USB from a host computer through Jupyter notebooks using the pypot library and the poppy-humanoid package (pip install poppy-humanoid). Comfort with Raspberry Pi, terminal, and servo/robotics concepts is expected. Visual programming (Snap!) exists for classroom use.

SDK access: Fully open source. Software is the Python pypot library plus the poppy-humanoid package, controlled interactively through Jupyter notebooks (the repo is ~83% Jupyter). Hardware is licensed CC BY-SA 4.0, software GPL v3. Runs on an onboard Raspberry Pi 4 with a preflashed Poppy image; connects to Dynamixel motors via USB2AX/USB2Dynamixel. No official ROS support is advertised. The 'Poppy' name is a protected trademark requiring attribution.

Sources and verificationchecked 2026-10

Next step

Looking for an alternative to Poppy Humanoid?

Tell us where you are and what it should do. We answer with real numbers: current price, landed cost for your country, lead time, and whether something else fits better.

Your sourcing request

Generation Robots (Inria Flowers) Poppy Humanoid to 🇺🇸 United States

Deliver to

Free for buyers. No spam, no list: we use your email only to answer this request. Some sellers pay us a referral fee when a sale goes through; it never changes which sellers we list or the order we show them in.