Stanford University · United States · Compact
ToddlerBot
A knee-high, 3.4 kg, 30-DoF 3D-printed open-source humanoid from Stanford that does push-ups, pulls a wagon, and transfers simulated policies zero-shot to reality for under $6,000, if you can build and train it yourself.
$6,000
Verified 2 months agoDelivered to Germany: from ~€6,483
What is in the crate
2 included|8 not included
Grippers, not dexterous hands
ToddlerBot ships with two interchangeable open-source end-effector designs rather than dexterous multi-finger hands: a parallel-jaw gripper for grasping, and a compliant palm for palm-like postures (push-ups, wagon pushing). Both are 3D-printed and part of the open design; the parallel-jaw gripper adds actuated DoF beyond the 30-DoF body count. There are no articulated fingers.
In the crate
You still have to add
Day oneNothing autonomous on power-up.
Reality check
This is a research kit, not a robot: for roughly $6,000 you get servos, a printed chassis, and Python code, then you assemble it, print the body, add your own Jetson and battery, and train the policies yourself. It runs about 19 minutes before overheating hurts stability, tops out at 0.25 m/s, and the mechanical design is licensed non-commercial. Buy it to do ML research; do not buy it expecting anything to work on power-up.
Can you get one, and what will it cost?
A planning estimate with machine, freight, duty, and tax shown separately.
Yes: importable into Germany on a standard machinery corridor.
Spare batteries and other accessories are excluded. Confirm compatibility and pricing with the seller.
- Machinebase
- €5,345
- Freightcourier parcel
- €90 - €153
- Import duty0%
- 0
- VAT19%
- €1,033 - €1,045
- Customs clearancecarrier fee
- €15 - €60
- Import estimate to Germany
- €6,483 - €6,603
Estimate, not a quote. Every rate is shown so the maths is auditable.
Lowest delivered price
~€6,483 - €6,603
The import estimate
No listing sells it at the price this estimate starts from, so read it as a benchmark for a fair delivered price. Review the import requirements below before ordering.
Compare sellersImport requirements for GermanyConformity, battery shipping, paperwork, and source documents. Review before ordering.
Loading import requirements…
Open the import referenceWhere to buy
Catalog checked 2026-09
Individuals and companies can inquire. Confirm the configuration, stock, and delivery with the seller.
Price notes: A complete build totals "under $6,000 USD," with ~90% of that going to the motors (ROBOTIS DYNAMIXEL) and the NVIDIA Jetson Orin NX computer. The concrete purchasable pieces: the ROBOTIS ToddlerBot Bundle Kit (DYNAMIXEL parts only) is $4,335.51 (currently sold out); a WowRobo pre-assembled chassis is $4,299 (also sold out, with global pre-order open and a ~30-day lead). On top of either you still buy the Jetson (~$600-900), a battery, WiFi module, cameras/IMU (on the parts kit), and print the shells. No official EUR price; both vendors quote USD and add duties/VAT at destination.
Comparing these sellers? Send one request: we reply within one business day with the ones that deliver to you, each priced delivered with its lead time, and, only if you tick the box, ask up to 3 of them for a written quote. Useful when a purchasing office needs more than one quote before it orders. Free for buyers.
Get delivered quotes- WowRobo (opens in a new tab)
International seller
ToddlerBot 2.0 assembly version, for buyers who do not want to source parts themselves (currently sold out; global pre-order open, ~30-day lead).
Request a quote
Price not published
- ROBOTIS (bundle kit) (opens in a new tab)
United States
Official parts bundle for the open-source build (currently sold out). This is components, not a finished robot: you print the frame and assemble it.
Request a quote
Price not published
Prices remain in the seller’s listed currency. Tax, freight, options, and rental periods follow each seller’s terms. A seller’s region does not guarantee delivery to your address.
How the ToddlerBot rates
Editorial ratings based on listed specifications and sales availability. They do not measure task performance, autonomy, or reliability.
- Class
- Developer / demo platformA platform for demonstrations or robotics development. SDK access and supported tasks depend on the exact configuration.
- CapabilityHardware specification indicators
- 3/5
- Baseline: any humanoid+1
- Degrees of freedom: 30 DOF+1.5
- Dexterity: grippers, not dexterous hands+0.25
- Scale: 56 cm tall0
- Payload: 1.484 kg0
- MaturitySales availability indicators
- 5/5
- How it sells: shipping now+4
- Buyer access: individual ordering route+1
Key specifications
Height
56 cm
Width
n/a
Depth
n/a
Weight
3.4 kg
Degrees of freedom
30
Battery
~19 min
Payload
1.484 kg
Top speed
0.25 m/s
Understand before you buy
Size to scale
Drawn next to a 1.80 m (5 ft 11 in) person. Every robot on the site uses this same reference, so you can trust the comparison at a glance.
ToddlerBot: 56 cm / 1 ft 10 in, 3.4 kg
What it does on day onewith zero programming
Nothing autonomous on power-up. ToddlerBot is a research kit: out of the box you get a 3D-printed bipedal chassis driven by DYNAMIXEL servos plus a fully pip-installable Python codebase. Its headline feature is a high-fidelity digital twin with plug-and-play zero-point calibration and motor system identification, so a policy trained in MuJoCo simulation transfers zero-shot to the real robot. After assembly and calibration you can run the provided policies (walking at up to 0.25 m/s, push-ups, pull-ups, wagon pushing, bimanual and full-body manipulation) or teleoperate it with a handheld gaming PC, but there is no app, voice assistant, or ready-made behavior for a non-programmer.
Best for: Robotics and embodied-AI researchers, university labs, and serious makers who want an affordable, reproducible, fully open bipedal platform to develop and test sim-to-real reinforcement-learning and imitation-learning policies (loco-manipulation), not buyers wanting a finished consumer robot.
Documented uses
Robotics R&DManipulation research
The research project publishes locomotion and manipulation methods with a reproducible open design.
Parts bundles are not complete robots. Assembly, compute, printed end effectors and policy setup are required before these experiments.
Source reviewed 2026-09-09Assessment from published documentation, not an independent performance test. Applies to the configuration described above.
What it takes to developskills, gear, and SDK access
Meaningful build and ML skill required. You assemble the robot from DYNAMIXEL servos and self-printed parts (Onshape CAD + STLs provided; documentation is aimed at builders with basic technical expertise, and five independent replications happened within a week of release). Software is Python >= 3.10, fully pip-installable, running on the onboard Jetson Orin NX 16GB. Training uses MuJoCo/MJX for RL and diffusion-policy (imitation) pipelines. Teleoperation and data collection use a Steam Deck or ROG Ally X. No ROS dependency; everything is in the open-source repo.
SDK access: Entirely open-source Python stack (hshi74/toddlerbot on GitHub). Codebase is MIT-licensed (commercial use allowed) and covers low-level control, RL training, diffusion-policy training, and real-world deployment; built on MuJoCo with MJX for accelerated training. The mechanical design files (Onshape, STLs) are CC BY-NC-SA 4.0, so the hardware design is non-commercial only. Full API docs, assembly manual, and bill of materials are published.
Sources and verificationchecked 2026-09
Sources
Price and availability verified 2026-09. Spotted a change? Tell us and we fix the listing.
Follow the ToddlerBot
Get an email when a new version ships, a seller starts or stops selling it, or it can be delivered to more countries.
One email when it matters. No spam, unsubscribe anytime.
Next step
Get delivered quotes for the ToddlerBot
Tell us how many, where they go and who is buying. We confirm the delivered price, lead time and paperwork for your country, and, if you tick the box, pass your request to up to three sellers that deliver there so they quote you directly. Labs and companies get a written delivered-cost breakdown they can put in a purchase request or grant budget.
Open the purchase plan for your country and quantityOther compact machines
ConsumerUnitree Robotics · China
Dev / demoR1
Events, showrooms, schools and enthusiasts who want an agile walking humanoid to demonstrate, not to program.
Editorial ratings
Capability3/5
Maturity5/5
- Height
- 123 cm
- Hands
- None
- Battery
- 60 min
$5,900
Listed price; check seller terms
Configuration: R1
Verified last month
ConsumerBooster Robotics · China
Dev / demoK1
Schools, RoboCup teams, and labs that want an affordable, fully open, competition-proven development platform.
Editorial ratings
Capability3/5
Maturity5/5
- Height
- 95 cm
- Hands
- Add-on
- Battery
- 30 min
€9,000
Listed price; check seller terms
Verified last month
ConsumerUnitree Robotics · China
Dev / demoR1 Air
Anyone who wants the lowest-cost agile walking humanoid for demonstrations, events or a first look at the category.
Editorial ratings
Capability3/5
Maturity5/5
- Height
- 123 cm
- Hands
- None
- Battery
- 60 min
$4,900
Listed price; check seller terms
Configuration: R1 Air
Verified last month