Galbot · China · Wheeled base
Galbot G1
The Galbot G1 is a wheeled semi-humanoid mobile manipulator from Beijing Galaxy General Robotics: a human-scale, two-armed upper body on a 360-degree omnidirectional base with a foldable-leg torso lift (wrist workspace up to 2.1 m high), rather than a walking biped.
$87,000
Verified last monthWhat is in the crate
5 included|5 not included
Hands sold separatelypriced by quote
The G1 ships as a task-configured mobile manipulator rather than with two anthropomorphic hands: the common deployment pairs a vacuum/suction module on one arm with an adaptive gripper on the other, and end-effectors are modular/interchangeable per task. A 12-DOF dexterous hand configuration exists and is what drives the higher end of the total-DOF count, but it is a configuration choice, not the default, and Galbot does not publish a standalone add-on price. Per-arm payload is about 5 kg (roughly 10 kg using both arms), with a torso-lift assist rated to heavier single loads.
In the crate
You still have to add
Day oneConfigured units run their trained commercial routines with essentially zero programming.
Reality check
It is a real, deployed picking-and-packing machine, but you are buying a wheeled two-armed mobile manipulator with a suction cup and a gripper (not a walking, five-fingered humanoid), and outside China you get it through a reseller at roughly $120K with import and support on you.
Can you get one, and what will it cost?
A planning estimate with machine, freight, duty, and tax shown separately.
You cannot order the Galbot G1 today: it is b2b only.
In China the G1 is genuinely on sale to businesses (and appeared on JD.com, where it sold out within minutes after the Feb 2026 Spring Festival Gala). Outside China there is no direct-from-Galbot channel yet, so a Western business buys through a robotics reseller at a large markup. This is a commercial mobile manipulator sold into retail, pharmacy, logistics and factory operations, not a consumer or hobby robot: expect an inquiry, an integration scope and a quote, not a hobbyist unboxing.
Import requirements for United StatesConformity, battery shipping, paperwork, and source documents. Review before ordering.
Loading import requirements…
Open the import referenceSales contacts
Catalog checked 2026-10
Businesses and institutions only. Confirm eligibility and configuration with the seller.
In China the G1 is genuinely on sale to businesses (and appeared on JD.com, where it sold out within minutes after the Feb 2026 Spring Festival Gala). Outside China there is no direct-from-Galbot channel yet, so a Western business buys through a robotics reseller at a large markup. This is a commercial mobile manipulator sold into retail, pharmacy, logistics and factory operations, not a consumer or hobby robot: expect an inquiry, an integration scope and a quote, not a hobbyist unboxing.
Price notes: China domestic pricing on JD.com and via direct/lease is roughly 630,000-699,700 yuan, about $87,000-$97,000 USD, which is the figure used here (~$87K as the lower, most-cited point; pharmacy-configured units have been quoted near 700,000 yuan). A higher-autonomy Premium configuration with NVIDIA Jetson Thor costs more (amount not published). Outside China the only listed price is a US reseller add-to-cart of about $119,995, a substantial import markup. No official EUR price exists (no EU channel), so priceEur is null. All figures are configuration-dependent and quote-based for business buyers.
Links marked commission link are affiliate links: if you buy through one, Robots International pays HumanoidStore a share of the sale, at no cost to you. Which sellers we list, their order, and everything we say about a machine are decided without regard to it.
- Robots International (opens in a new tab)
Commission link
United States
US-facing reseller add-to-cart listing at ~$119,995, well above China price; no lead time or shipping terms stated. Confirm US import, tariffs and support directly before ordering.
$119,995
Listed purchase price
- Galbot official store (galbot.com/g1) (opens in a new tab)
China (direct)
China domestic retail/lease, roughly 630,000-699,700 yuan (~$87K-$97K). Sold through JD.com, where it sold out within minutes after the Feb 2026 Spring Festival Gala (Galbot's page now has a Buy Now button linking to a JD.com listing for the G1, whose price and stock could not be read on 5 Oct 2026; the link here is Galbot's own product page). Business buyers typically go through direct inquiry/quote.
$87,000
Listed purchase price
- Robots Europa (opens in a new tab)
Commission link
European Union
Robots International's Dublin store: EUR 112,699.96 before VAT with Add to Cart; its checkout adds the buyer's own VAT. Shipping is added at checkout; availability shown as 'subject to availability'. Its euro price follows its dollar price, so it moves with the exchange rate
€112,699.96
Listed purchase price
- Galbot direct (sales inquiry) (opens in a new tab)
China (direct)
Official inquiry/quote path. International expansion (Hong Kong hub, broader markets) signaled for 2026-2027 but not yet a live global storefront.
Request a quote
Price not published
Prices remain in the seller’s listed currency. Tax, freight, options, and rental periods follow each seller’s terms. A seller’s region does not guarantee delivery to your address.
How the Galbot G1 rates
Editorial ratings based on listed specifications and sales availability. They do not measure task performance, autonomy, or reliability.
- Class
- Frontier machineA cutting-edge full-scale humanoid aimed at real work. Mostly enterprise, or still proving out.
- CapabilityHardware specification indicators
- 4/5
- Baseline: any humanoid+1
- Degrees of freedom: 21 DOF+1
- Dexterity: hands sold separately+0.75
- Scale: 173 cm tall+0.75
- Payload: 10 kg+0.25
- MaturitySales availability indicators
- 4/5
- How it sells: business sales only+3
- Commercial evidence: published pricing or regional delivery information+0.5
Key specifications
Height
173 cm
Width
60 cm
Depth
60 cm
Weight
92.5 kg
Degrees of freedom
21
Battery
~480 min
Payload
10 kg
Top speed
1.5 m/s
Understand before you buy
You cannot buy the Galbot G1 yet
It is sold to businesses by contract only. Register your interest and we will tell you the moment there is a route to get one.
One email when it matters. No spam, unsubscribe anytime.
Size to scale
Drawn next to a 1.80 m (5 ft 11 in) person. Every robot on the site uses this same reference, so you can trust the comparison at a glance.
Galbot G1: 173 cm / 5 ft 8 in, 92.5 kg
Footprint: 60 cm wide x 60 cm deep
About the Galbot G1background, hardware and buying reality
Its pitch is uptime and useful work, not spectacle: 8-hour battery, ~95-97% grasp success, and its AstraBrain/GraspVLA embodied-AI stack driving real, running deployments in Chinese pharmacies, autonomous retail across dozens of cities, and factory pilots with CATL, Bosch, Toyota, BAIC and SAIC. It is genuinely for sale to businesses in China (it briefly sold out on JD.com), but outside China you go through a reseller at a markup, so for a Western buyer it reads as commercial/B2B rather than off-the-shelf.
What it does on day onewith zero programming
Configured units run their trained commercial routines with essentially zero programming: they navigate an indoor space on the omni wheeled base, then pick, sort, pack and place items using the suction module and gripper. Galbot cites ~95-97% grasp success across varied objects and has G1s running live pharmacy fulfillment (locating, picking, packing 5,000+ SKUs, ~370 orders/day) and autonomous retail restocking across dozens of Chinese cities. Day one it does the manipulation task it was set up for; it does not invent new tasks for your site by itself.
Best for: Operations teams (retail restocking, pharmacy/e-commerce fulfillment, light logistics and factory line-side handling) that want a proven indoor picking-and-packing robot with long uptime and are prepared to buy it as a commercial deployment, including integration and, outside China, an import path.
Documented uses
Robotics R&DManipulation researchTeaching / educationDemo / showpieceReal work / logistics
Galbot's developer platform documents a G1 SDK with low-level joint control for labs, a launched reception and guiding kit, an education solution for college labs, and retail and industrial solutions.
Galbot names no customers for its retail and warehouse claims, which are sold as quoted contract projects; end effectors vary by configuration and the teleoperation arms are a separate accessory.
Source reviewed 2026-10-05Assessment from published documentation, not an independent performance test. Applies to the configuration described above.
What it takes to developskills, gear, and SDK access
To go beyond the pre-configured routines you need robotics/embodied-AI engineering: scene and task setup for your environment, integration via the GalbotSDK (Python and C++) and the open Galbot research stack on GitHub, plus familiarity with VLA-style manipulation models. Physically you need indoor flat floors (wheeled base, no stairs), space for a ~human-scale two-armed machine to maneuver, safe charging, and a site safety plan. For a non-China deployment add customs/import handling and your own regulatory conformity work.
SDK access: Galbot publishes GalbotSDK with Python and C++ APIs on its developer platform (developer.galbot.com), with high-level interfaces and low-level joint control, G1 documentation and URDF/MJCF/USD models, plus open research repositories on GitHub under Galaxy General Robotics (OpenWBT, OpenTrack/Any2Track, Humanoid-GPT, LATENT, robot description files), largely Apache-2.0. Its manipulation foundation model is GraspVLA and the integrated stack is branded AstraBrain. The platform has a free tier (SDK, documentation, simulation models) and paid tiers per robot per year, runs bootcamps with certification and offers an education solution for college labs; a production integration is still a commercial engagement with vendor support.
Sources and verificationchecked 2026-10
Sources
- Galbot G1 official product page (Galbot / Galaxy General Robotics)
- Galbot G1: what a wheeled humanoid means for operations (ChoZan) - specs, sensors, pricing in yuan, pharmacy and industrial deployments
- Galbot G1 review: price and specs 2026 (Robozaps) - dimensions, payload, speed, JD.com pricing, international availability
- Galbot G1 baike entry - canonical dimensions (arm span 190 cm, reach 2.4 m, torso lift 65 cm), suction+gripper hands, speed
- Galbot G1 US reseller listing (Robots International) - ~$119,995 add-to-cart
- Galbot official YouTube channel (@GalbotRobotics) and GalbotSDK / open research repos on GitHub
- Galbot Developer Platform: GalbotSDK, developer tiers, bootcamps, education and reception solutions (Chinese)
- Galbot G1 product manual v2.2.4: specifications, charger, standard and optional items (Chinese)
Price and availability verified 2026-10. Spotted a change? Tell us and we fix the listing.
Next step
Looking for an alternative to Galbot G1?
Tell us where you are and what it should do. We answer with real numbers: current price, landed cost for your country, lead time, and whether something else fits better.
Other wheeled base machines
ConsumerRainbow Robotics · South Korea
Dev / demoRB-Y1
Manipulation and imitation-learning labs that want a stable wheeled dual-arm platform.
Editorial ratings
Capability4/5
Maturity5/5
- Height
- 140 cm
- Hands
- Add-on
- Battery
- 180 min
$80,000
Listed price; check seller terms
Verified last month
ConsumerPollen Robotics · European Union
Dev / demoReachy 2
Research labs, universities, and embodied-AI teams that want an open, hackable, human-scale manipulation platform for teleoperation, imitation-learning data collection, and human-robot interaction work, not buyers looking for a robot that works autonomously out of the box.
Editorial ratings
Capability3/5
Maturity5/5
- Height
- 166 cm
- Hands
- Add-on
- Battery
- 480 min
€70,000
Listed price; check seller terms
Verified last month
ConsumerAKINROBOTICS · Other
Dev / demoMini ADA
Venues, schools and events in or near Turkey that want a reception or guidance robot from a local factory.
Editorial ratings
Capability3/5
Maturity5/5
- Height
- 123 cm
- Hands
- None
- Battery
- 480 min
$18,900
Listed price; check seller terms
Verified last month